Submissions

Online Submissions

Already have a Username/Password for Journal of Soil Science and Plant Nutrition?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

General instructions

Authors are requested to submit manuscripts electronically. We strongly suggest that authors carefully check the final version of their manuscripts for compliance with the format and style of the journal. In order to simplify journal production and minimize the number of errors, the final draft of the paper (once accepted by the Editorial Board) should be submitted as an electronic file created by a word processor. Likewise, authors are urged to send figures, photographs, graphs, and tables electronically, using programs that generate interchangeable formats (Corel Draw, Excel, Canvas, Freelance, etc.). Authors should indicate the program used to prepare text, figures, graphs, tables, etc.

1. LANGUAGE

Manuscripts must be written in English. Please make sure that English usage and grammar are correct.

2. MANUSCRIPT ORGANIZATION

Authors are requested to follow the instructions given below:

2.1. Typing
 
Manuscripts must be typed in Times New Roman, 12 cpi, with one and half spacing throughout (including footnotes, references, tables and legends) on paper not exceeding 30 cm in height, and a 2.5 cm wide margin on all four sides (left, right, top, bottom). One and a half spacing is equivalent to a maximum of 35 lines per page. All pages must be numbered in right bottom margin. The manuscript must be presented with numbered lines.

2.2. Size of manuscript

Manuscript should not exceed 30 typewritten pages, including figures and tables. Short communications and technical notes are limited to six type written pages including illustrations.
Only manuscripts not exceeding 30 printed pages are published free of charge. Authors will be charged US $ 30 for any additional printed page.

Manuscript should be presented in the following order: Title, name(s) of the author(s), complete address/affiliation and e-mail address of the corresponding author, Abstract, Keywords, Introduction, Materials and Methods, Results, Discussion, Conclusions, Acknowledgements and References. It is important to highlight that results and discussion must be written in separate sections. 

2.3 Manuscript layout

The first page of manuscript should contain the following items in the sequence given below:

  • Title in English of up to 12 words (Times New Roman 16 cpi, bold, capital letters). Spanish or Portuguese typed manuscript must also include an English translated title (Times New Roman 12 cpi, bold, lower case letters).
  • The title is concise and clear. A running-title is given.
  • First name (initials are also acceptable) and surnames of all authors in bold. E.g.: Carlos Ramírez or C. Ramírez
  • Affiliation(s) (not abbreviated) and postal address(es) of author(s), and the e-mail address of the corresponding author must be given.
  • Abstract should include the objectives, methods, results and conclusions. Its length should not exceed 200 words.
  • Up to six keywords. Wherever possible, use terms from the Multilingual Thesaurus of Geosciences (Pergamon Press, 19)

2.4. Division of the text

Manuscripts should be divided into sections and subsections by headings and subheadings up to a maximum of three levels. To differentiate them, CAPITAL BOLD LETTERS should be used for the first order titles, bold lower case letters for the second order, and italic bold lower case letters for the third order. Titles of sections and subsections should begin at the left-hand margins, followed by the first paragraph with one blank space. From the second paragraph in each section, the line to start a new paragraph should be indented.
The names of plant and animal species should be given in italics; for example, Zea mays.

2.5 Quantities, units, abbreviations, nomenclature

Only SI quantities and units should be used (SI = Le Système International d'Unités). If data with non-SI units are reported, they should be put in parentheses behind the corresponding data with SI units. Symbols and abbreviations used to represent variables, constants, quantities, properties, etc. must be defined in the text at their first occurrence.

2.6 Tables

Every table must be referred to in the text. Tables are to be numbered with Arabic numerals in the sequence in which they appear. They should be typed on separate pages (one page per table) at the end of the manuscript. In the text, the position at which a table appears, should be marked by (Table ... ) in the middle of the page as an extra line. Every table must begin with a caption that starts with, for example, “Table 3…”. The caption must explain in detail the contents of the table. Tables must be presented in such a way that they can be read and understood without reference to the text. All manuscript typed in Portuguese or Spanish must include English legends of tables in separate lines.

The size of the tables should be such that they can be reproduced directly after reduction to a width of 85 mm. Tables of larger size (horizontally page) can be printed only in exceptional circumstances.

Every column and line in a table must be labeled explicitly and the appropriate units must be indicated. References to tables must be handled in the same way as those in the text. Footnotes for tables should be indicated by lower-case letters in parentheses and typed directly under the table.

2.7 Figures

2.7.1 General remarks

Every figure must be referred to in the text. Figures will be printed in black and white. If special circumstances demand the use of color, the associated costs must be covered by the authors.

The size of figures must not exceed the size of the manuscript page. Figures should be typed on separate pages (one page per figure) at the end of the manuscript. All figures should be numbered with Arabic numerals, and in the sequence in which they are cited in the text. The position at which a figure appears in the text must be marked by (Figure ... ) as an extra line.

Every figure must be accompanied by a legend which immediately follows the figure number: “Figure 5…”. Figure legends must contain sufficient explanatory details for their comprehension without reference to the text. All manuscript typed in Portuguese or Spanish must include English legends of figures in separate lines. Captions of figures should be written on a separate sheet. In the final impression caption will be placed below the corresponding figures.

Particular care should be taken to make sure that the data shown in figures are explicitly labeled with regard to the units used, and that the accompanying legends provide adequate information about the conditions under which the data were obtained.

The quality of the figures must be such that they can be reproduced directly after reduction to a width of 85 mm. Figures of larger size can be printed only in exceptional cases. Numbers, letters, and symbols in the figures must be large enough to be still 1.5 mm high after reduction to the printed format.

2.7.2 Format

Regardless of the application use, when your electronic artwork is finalized, please “save as” or convert the images to one of the following formats (note the minimum resolution requirements). Figures must be saved in separated sheets in the following format: JPG of 300 dpi or TIFF of 300 dpi. Do not supply files that are optimized for screen use (like GIF, BMP, PICT, WPG), the resolution is too low.

As this journal is printed in black and white, the use of color or gray tones should be avoided in figures. For bar graphics, please use different lines or fillings to differentiate them, and when presenting curves, please use well-differentiated lines. If letters or other markers/symbols are to be inscribed, it is advisable to use large-size letters. Always use uniform lettering and font size (Times New Roman 12 cpi, as in the entire text).

2.7.3 Diagrams

Diagrams must be submitted as original drawings of excellent quality. Photographs or photocopies of drawings are in general not suitable for reproduction. Special symbols used should be explained in the diagram itself rather than in the legend, as such symbols may not appear in, or be lost during typesetting.

2.7.4 Alftones (photographs, drawings, paintings with fine shading, etc.)

Halftones should have a minimum resolution of 300 dpi. For combination of artworks (e.g. halftones containing line drawing, extensive lettering, color diagrams, etc) a minimum resolution of 600 dpi should be used. TIFF, JPG, PDF, MS Office files (Word, PowerPoint, Excel) can be used in figures. Images should approximate the desired size of the printed version. Color reproductions are free of charge for online publication. The cost of incorporating color photographs or graphs in the printed version is payable by the author(s).

2.8 Structural diagrams and mathematical equations
Structural diagrams of molecules as well as mathematical equations should be drawn or written at the appropriate places in the manuscript in an extra line. Equations should be denoted by Arabic numerals (in parenthesis) toward the right-hand margin.

2.9 Acknowledgements
Acknowledgements of financial support, advice, and other kinds of assistance should be made at the end of the paper under the heading "Acknowledgements".

2.10. References
Citations in the main text should be given by the surname and year of publication. For example, McDonald (1962), Vera and Luzio (1987), Ellies et al. (1995; 1999) or: (McDonald, 1962; Vera and Luzio, 1987; Ellies et al., 1995; 1999).
The manuscript should be carefully checked to ensure that the spelling of authors' names and dates are exactly the same in the text as in the reference list.
References should be listed in alphabetical order, and collected in a separate sheet at the end of the text. The final reference list should show the name of the author(s) followed by the year of publication, full title of article or book, journal name, volume and page numbers, as indicated below.

2.10.1 Journal articles

Van Ranst, E., Utami, S. R., Vanderdeelen, J., Shamshuddin, J. 2004. Surface reactivity of Andisols on volcanic asho along the Sunda arc crossing Java Island, Indenosia. Geoderma. 123, 193-203.

Alfaro, M. A., Salazar, F. S., Oenema, O., Iraira, S., Teuber, N., Ramirez, L., Villarroel, D. 2009. Nutrients balances in beef cattle production systems and their implications for the environment. J. Soil Sci. Plant Nutr. 9, 40-54.

2.10.2 Unpublished work

Papers that are unpublished but have been accepted must be cited with the journal's name followed by (in press). In all other cases, reference must be made to (unpublished work) or (personal communication).

2.10.3 Books and monographs
 
Tertian, R., Claisse, F. 1982. Principles of Quantitative X-Ray Fluorescence Analysis. Heyden, London, 385 p.

Hartge, K. H., Stewart B. A. 1995. Soil Structure: Its Development and Function. Advances in Soil Science. CRC Lewis Publishers, Boca Ratón, FL, 424 p

2.10.4 Chapters in multi-author books

Wold, S., Sjöström, M. 1977. Chemometrics, Theory and Application. In: B. R. Kowalski (ed). ACS Symposium Series Nº 52. American Chemical Society, Washington, DC, pp: 243–282.

Oades, J., M. 1989. An introduction to organic matter in mineral soils. In: J. B. Dixon, S.B. Weed (eds). Minerals in Soil Environments, Second Edition. Soil Science Society of America, Madison, WI, pp: 89-159.

2.10.5 Theses

Hassink, J. 1995. Organic matter dynamics and N mineralization in grassland soils. Doctoral thesis, Wageningen University, The Netherlands, 250 p.

2.10.6 Patents

Miller, B.O. 1952. U.S. Patent 2542356, Dow Chemical Company; Chemical Abstracts 51 (1961) 2870.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The manuscript is original research and it is not being submitted to another journal in this moment.

  2. Manuscript is written in English.

  3. The English language of manuscript was edited by native speaker or English editing translation services. We strongly recommend the American Journal Expert (www.journalexperts.com). The certification must be attached.

  4. The title is concise and clear.

     

  5. A running-title is given.

  6. Abstract includes the objectives, methods, results and conclusions ant its length is no more than 250 words.
  7. Manuscript is typed in Times New Roman, 12 cpi, with one and half spacing.


  8. The margins are 2.5 cm on all four sides (left, right, top, bottom).
  9. All pages are numbered in right bottom margin and include the line number, too.

  10. The scientific names of plant and animal species are given in italics; for example, Zea mays.
  11. Only SI quantities and units are used (SI = Le Système International d'Unités). Remember that if data with non-SI units are reported, they should be put in parentheses behind the corresponding data with SI units.

  12. The size of the tables are such that they can be reproduced directly after reduction to a width of 85 mm.
  13. The quality of the figures is such that they can be reproduced directly after reduction to a width of 85 mm. The Figures must be saved in separated sheets in the following format: JPG of 300 dpi or TIFF of 300 dpi. Do not supply files that are optimized for screen use (like GIF, BMP, PICT, WPG), the resolution is too low.

     

  14. The graphs are colored in grey scale or full color. Avoid graphs showing single white bar. Remember that color graphs will be published online, but hard copy version will include grey scale graphs. For line graphics, different lines or fillings to differentiate them were used, and when presenting curves, well-differentiated lines were used.

  15. All graphs include standard deviation or standard error bars.

  16. All Figures and Tables are referred to in the manuscript text.
  17. The manuscript was carefully checked to ensure that the spelling of authors' names and dates are exactly the same in the text as in the reference list.

  18. All references are included in the text and were carefully revised.

     

  19. The number of references not exceeds 30 references.

     

  20. The references containing URL are not included.
  21. Results and discussion written in separated sections and conclusion section must be written according to objectives of work and hypothesis.

  22. Acknowledgements of financial support are included at the end of the paper under the heading "Acknowledgements".

  23. A list of at least three suggested reviewers (including their affiliations) is included.
 

Copyright Notice

The Chilean Society of Soil Science, as joint publishers of the Journal, reserve all rights for the complete or partial reproduction of the materials published in  Journal of Soil Science and Plant Nutrition. The right to reproduce material that is subject to copyright must be obtained from the authors, who should notify to the editorial office of Journal of Soil Science and Plant Nutrition.

 

 

 

Privacy Statement

The Chilean Society of Soil Science, as joint publishers of the Journal, reserve all rights for the complete or partial reproduction of the materials published in Journal of Soil Science and Plant Nutrition.

 

 


Chilean Society of Soil Science
Scientific and Technological Bioresource Nucleus BIOREN-UFRO
Universidad de La Frontera
Avenida Francisco Salazar 01145
P.O. Box 54-D
Temuco, Chile.


jsspn@ufromail.cl